复杂枢纽站CTC3.0功能的优化研究与实现

doi:10.3969/j.issn.1673-4440.2021.12.002

铁路通信信号工程技术 ›› 2021, Vol. 18 ›› Issue (12): 7-10,17.DOI: 10.3969/j.issn.1673-4440.2021.12.002

复杂枢纽站CTC3.0功能的优化研究与实现

万里成¹，陈宣²

1．西南交通大学，成都 611731；
2．卡斯柯信号有限公司，上海 200070

收稿日期:2021-05-18 修回日期:2021-05-30 出版日期:2021-12-24 发布日期:2021-12-24
基金资助:
中国国家铁路集团有限公司重大课题项目（K2019X010）

Research and Realization of Optimization of CTC3.0 Functions in Complex Junction Hub Stations

Wan Licheng¹, Chen Xuan²

1. Southwest Jiaotong University, Chengdu 611731, China；
2. CASCO Signal Ltd., Shanghai 200070, China

Received:2021-05-18 Revised:2021-05-30 Online:2021-12-24 Published:2021-12-24

摘要/Abstract

摘要： 从应用角度出发，以济南站为例，针对一站多场的复杂枢纽站计划拆分算法进行研究，设计技术作业大表软件，开发根据列车运行调整计划、运行限制条件等内容，自动将中心站列调车计划批分成各场计划的解决方案。通过详细介绍车站计划编制拆分的功能原理、设计思路及功能实现流程，解决复杂枢纽站CTC功能无法开通部署的问题

关键词: CTC3.0, 复杂枢纽站, 车站计划编制拆分

Abstract: From the application point of view, this paper takes Jinan Station as an example to study the problem of splitting a plan for a complex hub station with one station and multiple yards. Software is developed for designing a general table for technical operations. A solution is provided to automatically split the train plans and shunting plans of the center station into plans for each yard based on plans for train operation adjustment and operation restrictions, etc. It introduces in detail the principle, the design thinking and the process to fulfill the function of formulating and splitting station plans, which solves the problem that CTC functions cannot be performed or deployed for complex hub stations

Key words: CTC3.0, complex hub station, splitting of station plans

中图分类号:

U284.59

万里成, 陈宣. 复杂枢纽站CTC3.0功能的优化研究与实现[J]. 铁路通信信号工程技术, 2021, 18(12): 7-10,17.

Wan Licheng, Chen Xuan. Research and Realization of Optimization of CTC3.0 Functions in Complex Junction Hub Stations[J]. Railway Signalling & Communication Engineering, 2021, 18(12): 7-10,17.

图/表 4

参考文献

[1]崔虎，王兴利，汤宝伟.CTC3.0车站子系统的研究[J].铁道通信信号，2016，52(Z2):32-35.
[2]徐亚萍.仿真CTC车站子系统的设计与实现[D].北京:北京交通大学，2018.
[3]陈宣，李华荣，王如跃.基于CTC3.0系统的车站调车进路控制方案[J].铁道通信信号，2018，54(7):14-16.
Chen Xuan, Li Huarong, Wang Ruyue. Route Control Scheme for Shunting at Station Based on CTC3.0 System[J]. Railway Signalling & Communication, 2018, 54(7): 14-16.
[4]王美红.CTC3.0车站计划管理设计与实现[J].铁路通信信号工程技术, 2017，14（4）:20-22.
Wang Meihong. Design and Implementation of CTC3.0 Station Planning Management System[J]. Railway Signalling & Communication Engineering, 2017, 14(4): 20-22.
[5]王兴利.CTC仿真列车运行模型研究[J].铁路通信信号工程技术, 2020，17(10)：24-27.
Wang Xingli. Research on Running Model of Simulation Train in CTC System[J]. Railway Signalling & Communication Engineering, 2020, 17(10)：24-27.
[6]张晶.高速铁路CTC系统仿真技术的研究[J].铁路通信信号工程技术，2019，16(2)：14-17.
Zhang Jing. Research on CTC Simulation Technology of High Speed Railway[J]. Railway Signalling & Communication Engineering, 2019, 16(2)：14-17.
[7]喻柱，郑天健，王军权.CTC 3.0车站占线板的设计与实现[J].铁道通信信号，2018，54(10):28-30.
Yu Zhu, Zheng Tianjian, Wang Junquan. Design and Realization of Station Traffic Indication Board for CTC3.0[J]. Railway Signalling & Communication, 2018, 54(10): 28-30.
[8]吴春波，王如跃，赵凯.基于CTC3.0的大型技术站调度集中控制系统方案研究[J].电子世界，2018(20):23-25.
[9]吴春波，崔虎，费振豪.基于TDCS/CTC的车站接发车作业流程控制研究[J].铁道通信信号，2013，49(6):6-8.
Wu Chunbo, Cui Hu, Fei Zhenhao. Research on Workflow Control of Train Operation at Station Based TDCS/CTC[J]. Railway Signalling & Communication, 2013, 49(6): 6-8.

复杂枢纽站CTC3.0功能的优化研究与实现

Research and Realization of Optimization of CTC3.0 Functions in Complex Junction Hub Stations

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 4

参考文献

相关文章 1

编辑推荐

Metrics

本文评价