欢迎访问铁路通信信号工程技术,今天是 English

铁路通信信号工程技术 ›› 2022, Vol. 19 ›› Issue (2): 11-14.DOI: 10.3969/j.issn.1673-4440.2022.02.003

• • 上一篇    下一篇

BTM智能检测系统设计思路

刘 迪   

  1. 中国铁路哈尔滨局集团有限公司,哈尔滨 150000
  • 收稿日期:2021-11-08 修回日期:2021-11-15 出版日期:2022-02-25 发布日期:2022-02-25
  • 作者简介:刘迪(1980—),男,高级工程师,本科,主要研究方向:铁道信号,邮箱:13945182381@163.com
  • 基金资助:
    中国铁路总公司科学技术研究项目(2013X001)

Design Concept of BTM Intelligent Detection System

Liu Di   

  1. China Railway Harbin Group Co., Ltd., Harbin    150000, China
  • Received:2021-11-08 Revised:2021-11-15 Online:2022-02-25 Published:2022-02-25

摘要: 应答器传输系统是CTCS-2/3级列控车载系统中ATP设备的重要组成单元,BTM工作是否正常对动车组列控车载设备的运用有直接影响。研究BTM智能化检测系统的设计思路,如何采用较便利的测试方法,实现在列车动态运行条件下对BTM下行链路发射信号中心频率、下行链路信号发射能量、上行链路信号频偏的检测及上行链路信号Iu1等性能的检测,判断BTM是否处于亚健康工作状态。同时,积累大量检测数据,为后续利用大数据技术实现BTM性能变化趋势分析、故障预判等提供数据基础。

关键词: 应答器传输系统, 智能化检测, 性能检测, 趋势分析

Abstract: Balise transmission module (BTM) is an important component unit of ATP equipment of CTCS-2/3 train control onboard system. The normal operation of BTM has a direct impact on the application of ATP. The design concept of BTM intelligent detection system shall be researched, and it also shall to study how to use more convenient testing methods to implement the testing of BTM down link transmitting signal center frequency, down link transmitting signal energy, uplink signal frequency deviation and uplink signal Iu1, so as to judge whether the BTM is working in a sub-health state. Meanwhile, a large amount of detection data is accumulated to provide a basis for the subsequent BTM performance trend analysis and fault prediction by using big data technology.

Key words: BTM, intelligent detection, performance test, trend analysis

中图分类号: