欢迎访问铁路通信信号工程技术,今天是 English

铁路通信信号工程技术 ›› 2021, Vol. 18 ›› Issue (12): 18-21.DOI: 10.3969/j.issn.1673-4440.2021.12.004

• • 上一篇    下一篇

简析拉萨机车车辆整备基地联系电路过渡设计实例

杨 城,朱 明,唐 强   

  1. 中铁二院工程集团有限责任公司,成都 610031
  • 收稿日期:2021-03-25 修回日期:2021-10-20 出版日期:2021-12-24 发布日期:2021-12-24
  • 基金资助:
    中铁二院工程集团有限责任公司科研项目(KYY2019040(19-21))

Case Analysis of Liaison Circuit between Lhasa Station and Lhasa Loco Depot in Renovation Design

Yang Cheng,  Zhu Ming,  Tang Qiang   

  1. China Railway Eryuan Engineering Group Co., Ltd., Chengdu 610031, China
  • Received:2021-03-25 Revised:2021-10-20 Online:2021-12-24 Published:2021-12-24

摘要: 以拉萨站既有改造为背景,对过渡期间拉萨站机车车辆整备基地与拉萨站计算机联锁的接口电路进行设计,提出在标准电路基础上串接DJ条件,以实现室内、室外显示一致,保证电路故障导向安全,对过渡后机车车辆整备基地与拉萨车站之间的场联电路进行说明,为今后类似的工程实施提供设计参考。

关键词: 机务联系电路, 场间联系电路, 计算机联锁, 接口电路

Abstract: This paper describes an interim circuit with contact function between Lhasa station and Lhasa loco depot during the Lhasa station renovation. Based on the standard circuit, conditions of DJ shunting signal are added in order to achieve consistency between indoor and outdoor display and ensure the fail-safe feature of the circuit. After the renovation, the interlocking conditions between the loco depot and the station are realized by the liaison circuit between yards. This paper can provide a design reference for similar projects in the future.


Key words: liaison circuit with loco depot, liaison circuit between yards, CBI, interface circuit

中图分类号: