欢迎访问铁路通信信号工程技术,今天是 English

铁路通信信号工程技术 ›› 2022, Vol. 19 ›› Issue (1): 92-95.DOI: 10.3969/j.issn.1673-4440.2022.01.019

• • 上一篇    下一篇

道岔控制电路分布电容探讨

樊西宁1,2   

  1. 1.北京全路通信信号研究设计院集团有限公司,北京 100070;
    2.北京市高速铁路运行控制系统工程技术研究中心,北京 100070
  • 收稿日期:2020-09-02 修回日期:2021-10-12 出版日期:2022-01-25 发布日期:2022-01-25
  • 作者简介:樊西宁(1989—),男,高级工程师,本科,主要研究方向:铁路信号自动控制,邮箱:fanxining@crscd.com.cn。

Discussion on Distributed Capacitance in Switch Control Circuit

Fan Xining1, 2   

  1. 1. CRSC Research & Design Institute Group Co., Ltd., Beijing 100070, China;
    2. Beijing Engineering Technology Research Center of Operation Control Systems for High Speed Railways, Beijing 100070, China
  • Received:2020-09-02 Revised:2021-10-12 Online:2022-01-25 Published:2022-01-25

摘要: 分布式电容随道岔控制距离变长而增加,电容堆积对道岔表示继电器正常工作造成极大影响,通过对分布式电容形成原因的理论探讨,得出影响分布式电容容值的因素,并提出工程应用中降低和解决分布式电容方法,对于提高交流道岔控制电路表示可靠性有积极意义。

关键词: 道岔控制电路, 远距离控制电缆, 表示可靠性

Abstract: The distributed capacitance increases with the turnout control distance becoming longer, and the accumulation of capacitance has a great impact on the normal operation of turnout indication relay. Through the theoretical analysis of the causes of the formation of distributed capacitance, the factors affecting the distributed capacitance are obtained, and the methods to reduce and solve the distributed capacitance in engineering application are put forward. It has positive significance to improve the reliability of AC turnout control circuit.

Key words: turnout control circuit, remote control cable, indication reliability

中图分类号: