Research on Differences of Control Circuit for Five-Wire AC Switch

doi:10.3969/j.issn.1673-4440.2024.12.002

Railway Signalling & Communication Engineering ›› 2024, Vol. 21 ›› Issue (12): 9-14,35.DOI: 10.3969/j.issn.1673-4440.2024.12.002

Previous Articles Next Articles

Research on Differences of Control Circuit for Five-Wire AC Switch

Cui Yan^{1, 2}, Xie Bocai³

1. CRSC Research & Design Institute Group Co., Ltd., Beijing 100070, China；
2. Engineering Research Center of Railway Industry of Intelligent and Autonomous Train Control, Beijing 100070, China；
3. China State Railway Group Co., Ltd., Beijing 100844, China

Received:2024-04-18 Revised:2024-12-05 Online:2024-12-25 Published:2024-12-25

五线制交流道岔控制电路差异性研究

崔岩^1，2，谢博才³

1．北京全路通信信号研究设计院集团有限公司，北京 100070；
2．列车自主运行智能控制铁路行业工程研究中心, 北京 100070；
3．中国国家铁路集团有限公司，北京 100844

作者简介:崔岩（1989—），男，工程师，本科，主要研究方向：铁路信号，邮箱：cuiyan2231@crscd.com.cn
基金资助:
中国国家铁路集团有限公司重点课题项目（N2022G027）

Abstract

Abstract: At present, there are some design differences in the control circuit for five-wire AC switch in stations with computer based interlocking, which causes inconvenience during the management and maintenance work of relevant bodies. By comparing and analyzing the circuit operation principles and requirements of the difference points in the control circuit, this paper puts forward circuit modification suggestions and design ideas from the perspectives of practical application, debugging and maintenance, which has positive value for a uniform standardized design of the control circuit for five-wire AC switch.

Key words: five-wire AC switch, control circuit, standardized design, fail-safe, control logic optimization

摘要： 当前计算机联锁车站的五线制交流道岔控制电路的设计存在一定的差异，给相关单位的管理与维护带来不便。通过对比分析控制电路差异点的电路动作原理和需求，从有利于实际运用和调试维护的角度提出电路修改建议和设计思路，对五线制交流道岔控制电路统一定型设计有积极意义。

关键词: 五线制交流道岔, 控制电路, 定型设计, 故障-安全, 控制逻辑优化

CLC Number:

U213.6

Cui Yan, Xie Bocai. Research on Differences of Control Circuit for Five-Wire AC Switch[J]. Railway Signalling & Communication Engineering, 2024, 21(12): 9-14,35.

崔岩, 谢博才. 五线制交流道岔控制电路差异性研究[J]. 铁路通信信号工程技术, 2024, 21(12): 9-14,35.

Figures/Tables 6

References

[1]国家铁路局.铁路信号设计规范:TB 10007-2017[S].北京:中国铁道出版社，2017.
[2]国家铁路局.铁路车站计算机联锁技术条件:TB/T 3027-2015[S].北京:中国铁道出版社，2016.
[3]国家铁路局.高速铁路设计规范:TB 10621-2014[S].北京:中国铁道出版社，2015.
[4]王秉文.6502电气集中工程设计[M].北京:中国铁道出版社，1997.
[5]魏君，卢伟，梁宏伟.ZD6型电动转辙机道岔控制电路工作原理及故障处理[J].科学技术创新，2018（19）：4-5.
[6]陈杰，任哲宗，王茜，等.新一代安全型道岔控制电路研制[J].铁路通信信号工程技术，2024，21（2）：103-107.
Chen Jie, Ren Zhezong, Wang Qian, et al. Development of New Generation of Safe Turnout Control Circuit[J]. Railway Signalling & Communication Engineering, 2024, 21(2): 103-107.
[7]付斌.交流道岔表示电路原理及电路故障处理[J].中国新技术新产品，2016（10）：90-91.
[8]崔明松.交流转辙机八线制道岔控制电路故障诊断分析方法[J].城市轨道交通研究，2023，26（9）：191-194，198.
Cui Mingsong. AC Switch Machine Eight-wire Turnout Control Circuit Fault Diagnosis and Analysis Method[J]. Urban Mass Transit, 2023, 26(9): 191-194, 198.
[9]高利民，杨吉，杨树忠.五线制道岔控制电路故障诊断方法[J].中国铁路，2014（5）：41-42.
[10]冯李，苏朗，邵晨，等.ZDJ9交流道岔控制电路及断线故障分析[J].中国设备工程，2019（8）：35-36.
[11]黄国胜.S700K五机牵引双动道岔控制电路故障处理[J].铁道建筑技术，2009（3）：130-131，145.
Huang Guosheng. Malfunction Treatment in the Control Circuit of S700K Quintuplicate Unit Twin Drive Turnouts[J]. Railway Construction Technology, 2009(3): 130-131, 145.
[12]赵德生.提速道岔表示电路的故障分析与处理[J].铁道运营技术，2018，24（4）：32-35.
[13]郑培珍,任同群,王大志,等.尖轨横纵位移综合测量系统及远程数据采集与控制[J].机电工程技术，2023，52(3):62-66.
Zheng Peizhen, Ren Tongqun, Wang Dazhi, et al.Comprehensive Measurement System for Horizontal and Vertical Displacements of Switch Rail and Its Wireless Transmission[J].Mechanical & Electrical Engineering Technology, 2023, 52(3):62-66.
[14]何华海.新线建设道岔联合整治前置法的分析与运用[J].铁路通信信号工程技术，2024，21（11）：121-126.
He Huahai. Analysis and Application of Pre-Treatment Method for Joint Rectification of Turnouts in New Line Construction[J]. Railway Signalling & Communication Engineering, 2024, 21(11): 121-126.
[15]刘俊杰.ZDJ-9型交流道岔转辙机故障智能识别方法[J].城市轨道交通研究，2024，27（4）：262-265.
Liu Junjie. Intelligent Identification Method for ZDJ-9 AC Turnout Switch Machine Faults[J]. Urben Mass Transot, 2024, 27(4): 262-265.
[16]毕彬杰，夏齐林.双动道岔继电器瞬间落下问题的研究及改进[J].铁道运营技术，2022，28（2）：5-7.
[17]钱曙杰.关于1/30双动道岔DKJ错误自闭的原因分析和解决方法[J].上海铁道科技，2008（2）：36.
[18]李建锋.提速道岔电路中存在问题的分析与处理[J].上海铁道科技，2017（1）：77-78.
[19]刘智平.高速铁路道岔偶发故障分析及处理[J].铁道标准设计，2017，61（9）：148-151.
Liu Zhiping. Accidental Fault Analysis and Treatment of Switches in High-speed Railway[J]. Railway Standard Design, 2017, 61(9): 148-151.
[20]曾科智.远距离三相交流道岔表示故障解决方案探讨[J].铁路通信信号工程技术，2022，19（6）：96-100，116.
Zeng Kezhi. Solution to Indication Failure of Long-Distance Three-Phase AC Switch[J]. Railway Signalling & Communication Engineering, 2022, 19(6): 96-100, 116.
[21]李泽军，齐俊.道岔控制电路故障分析诊断 [J].中国科技信息，2024（9）：69-72.

Research on Differences of Control Circuit for Five-Wire AC Switch

五线制交流道岔控制电路差异性研究

PDF

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 6

References

Related Articles 8

Recommended Articles

Metrics

Comments

[1]	Chen Jie, Ren Zhezong, Wang Qian, Yu Zhuang, Wang Bingqian. Development of New Generation of Safe Turnout Control Circuit [J]. Railway Signalling & Communication Engineering, 2024, 21(2): 103-107.
[2]	Xu Gaozhen. Research on CTCS-4 New Train Control System Combined with Intermittent Backup Mode [J]. Railway Signalling & Communication Engineering, 2023, 20(7): 10-15,23.
[3]	Xu Haibo, Wang Dingming. Design and Optimization of Simulated Turnout Circuit Based on TYJL-ADX Computer Interlocking [J]. Railway Signalling & Communication Engineering, 2023, 20(6): 15-19.
[4]	Liu Chuanhe, Xie Bocai, Jiang Lisheng, Zhang Fusong. Research on Key Technologies of Safety LED Signal [J]. Railway Signalling & Communication Engineering, 2022, 19(8): 1-5.
[5]	Fan Xining. Discussion on Distributed Capacitance in Switch Control Circuit [J]. Railway Signalling & Communication Engineering, 2022, 19(1): 92-95.
[6]	Song Dan, Wang Hao. Fault Diagnosis Method of Turnout Control Circuit Based on IBOA-PNN [J]. Railway Signalling & Communication Engineering, 2021, 18(12): 1-6.
[7]	Qiu Zhaoyang. Understanding and Application of Fail-Safe Concept [J]. Railway Signalling & Communication Engineering, 2021, 18(11): 80-84,94.
[8]	Huang Zuning, Shi Weishi, Lai Zhiping. Improvement Design of Turnout Local Control Circuit in Signaling Training Base for Urban Rail Transit [J]. Railway Signalling & Communication Engineering, 2021, 18(10): 76-80.