Welcome to Railway Signalling & Communication Engineering, Today is 中文

Railway Signalling & Communication Engineering ›› 2022, Vol. 19 ›› Issue (4): 43-46,57.DOI: 10.3969/j.issn.1673-4440.2022.04.009

Previous Articles     Next Articles

Design of C-band Eight-way Microstrip Divider

Ma Rui   

  1. CRSC Research & Design Institute Group Co., Ltd., Beijing    100070, China
  • Received:2021-03-22 Revised:2022-03-25 Online:2022-04-25 Published:2022-04-25

一种C波段一分八微带功分器的设计

马 瑞   

  1. 北京全路通信信号研究设计院集团有限公司,北京 100070
  • 作者简介:马瑞(1990—),女,工程师,硕士,主要研究方向:铁路通信信息,邮箱:marui2268@crscd.com.cn
  • 基金资助:
    北京全路通信信号研究设计院集团有限公司科研项目(2300-K1210045.01)

Abstract: In rail transit communication systems, power dividers/combiners are widely used. Based on the EUHT system and the design theory of wideband Wilkinson power dividers, and taking advantage of the easily-conformal and planar characteristics of microstrips, this paper designs a C-band microstrip wideband Wilkinson eight-way power divider, in order to cover the frequency range from 5.15 to 5.85 GHz. The resulting port isolation is better than 20dB; the difference in output amplitude is less than 0.15dB and there is no phase difference between outputs.

Key words: power divider, Wilkinson, port isolation, amplitude consistency, phase consistency

摘要: 在轨道交通通信系统中功分器、合路器被广泛应用,基于超宽带通信系统,依据宽带Wilkinson功分器设计理论,利用微带结构平面易共形特点,设计一种C波段微带形式宽带Wilkinson一分八等分功分器,要求覆盖的频率范围为5.15~5.85 GHz,端口隔离度优于20 dB,各端口输出幅度差异小于0.15 dB,相位基本无差异。

关键词: 功分器, Wilkinson, 端口隔离度, 幅度一致性, 相位一致性

CLC Number: